Pascal

IB · Grade 9 · Mathematics · Chapter 7

Mensuration

Free worksheets and mock tests on this chapter, with answer keys. Make one in about a minute and print it, or take the mock test online and get it marked.

What this chapter covers

  • Identify and explain standard SI units for length, mass, capacity, time, temperature, and speed
  • Convert between different units of length, including kilometres, metres, centimetres, and millimetres
  • Calculate absolute and percentage errors in measurement and approximations
  • Explain the sources of measurement error and the concept of measurement accuracy
  • Apply formulas to determine perimeter, area, surface area, and volume in practical scenarios
  • Use measurement concepts to solve real-world problems involving capacity and material minimization

Sample questions

Try these, then make a full worksheet or mock test on the chapter. They were written by AI and checked by a second AI, but a mistake can still slip through.

  1. 1.Let x be the length in metres of a rectangle, and y the width in metres. If the area of the rectangle is fixed at 1000 m² and the perimeter P is given by P = 2x + 2000/x, which value of x will minimise the perimeter?

    1. A.20 m
    2. B.10 m
    3. C.31.6 m
    4. D.50 m
    Show the answer

    Answer: C. 31.6 m

    Given P = 2x + 2000/x for area fixed at 1000 m² (since area = x × y = 1000 implies y = 1000/x). From the investigation in the chapter, the minimum perimeter occurs at x ≈ √1000 ≈ 31.6 m.

  2. 2.A tape measure shows a length as 150 cm, with accuracy ±0.5 cm. What is the percentage error in the measurement?

    1. A.±0.5%
    2. B.±0.0033%
    3. C.±3.3%
    4. D.±0.33%
    Show the answer

    Answer: D. ±0.33%

    Absolute error = 0.5 cm. Percentage error = (0.5 / 150) × 100% = 0.333%, approximately ±0.33%.

  3. 3.Given a sector of a circle with radius 6 cm and sector area 25 cm², find the angle θ in degrees subtended at the center.

    1. A.150°
    2. B.79.6°
    3. C.90°
    4. D.60°
    Show the answer

    Answer: B. 79.6°

    Sector area = (θ/360) × π × r² ⇒ 25 = (θ/360) × π × 36 ⇒ 25 = (θπ)/10 ⇒ θ = 250/π ≈ 79.6°.