CBSE · Class 8 · Science · Chapter 4
Electricity: Magnetic and Heating Effects
Free worksheets and mock tests on this chapter, with answer keys. Make one in about a minute and print it, or take the mock test online and get it marked.
What this chapter covers
- Describe the magnetic effect of electric current and explain how a current-carrying wire can create a magnetic field.
- Demonstrate, through simple experiments, the deflection of a magnetic compass needle in the presence of a current-carrying conductor.
- Construct a basic electromagnet using a coil of wire, an iron nail, and a battery, and explain the factors that affect its strength.
- Compare and contrast temporary magnets (electromagnets) and permanent magnets based on their properties and methods of creation.
- Analyze the connection between electricity and magnetism by relating the experimental observations to the historical discovery by Hans Christian Oersted.
- Identify common applications of the magnetic effect of electric current in everyday devices such as electric bells, motors, and loudspeakers.
Sample questions
Try these, then make a full worksheet or mock test on the chapter. They were written by AI and checked by a second AI, but a mistake can still slip through.
1.Let I be the current flowing through a straight conductor and M be the magnetic field created around it. What happens to the magnetic compass needle placed near the conductor when the current flows through the conductor?
- A.The needle loses its magnetic property.
- B.The needle stops moving and remains stationary.
- C.The needle points to the north pole of Earth without deflection.
- D.The needle deflects from the original north-south direction.
Show the answer
Answer: D. The needle deflects from the original north-south direction.
When current I flows through the conductor, it creates a magnetic field M around it, causing the magnetic compass needle to deflect from its original north-south alignment, showing the magnetic effect of electric current.
2.An electromagnet is made by winding N turns of insulated wire around an iron nail and connecting it to a battery. Which of the following actions would NOT increase the strength of this electromagnet?
- A.Using a stronger battery with higher voltage.
- B.Increasing the number of turns N of the coil.
- C.Increasing the electric current flowing through the coil.
- D.Removing the iron nail from the coil.
Show the answer
Answer: D. Removing the iron nail from the coil.
Removing the iron nail removes the iron core, which makes the magnetic field weaker. Increasing turns, electric current or using a stronger battery increases the magnetic field strength, not removing the core.
3.In an experiment, a nichrome wire is connected in a circuit with a battery. After some time, the wire feels warm. What causes this heating effect in the wire?
- A.Nichrome is a good conductor so it generates heat easily.
- B.The magnetic field created by the current heats the wire.
- C.Resistance of the wire opposes the current flow, converting electrical energy to heat.
- D.The battery's chemical reaction directly heats the wire.
Show the answer
Answer: C. Resistance of the wire opposes the current flow, converting electrical energy to heat.
The heating effect is because the nichrome wire has electrical resistance that converts electrical energy into heat as current flows, warming the wire. The magnetic field does not cause heating.
4.A student constructs a simple electric cell by inserting copper strips and iron nails into lemons connected in series. The student connects this battery to an LED. Which correctly explains why the LED glows?
- A.The copper strips are magnets allowing current to flow without chemical reactions.
- B.The LED glows due to the magnetic effect of lemons.
- C.The lemon juice acts as an electrolyte allowing chemical reactions that generate electric current.
- D.The iron nails provide electric insulation preventing current flow.
Show the answer
Answer: C. The lemon juice acts as an electrolyte allowing chemical reactions that generate electric current.
The lemon juice acts as an electrolyte that facilitates a chemical reaction between copper and iron electrodes, producing electric current. This current powers the LED to glow.